#304l stainless steel full

Recommended filler rods and electrodes for stainless steel 304 is grade 308 stainless steel. Weldabilityįusion welding performance for type 304 stainless steel is excellent both with and without fillers. Solution treatment or annealing can be done by rapid cooling after heating to 1010- 1120☌. Heat Treatmentģ04 stainless steel cannot be hardened by heat treatment. This means coolants and lubricants are necessary and must be used in large quantities. Chip breakers should be employed to assist in ensuring swarf remains in heat concentrating at the cutting edges. Cuts should be light but deep enough to prevent work hardening by riding on the surface of the material. Machining can be enhanced by using the following rules: Cutting edges must be kept sharp. The fabricated components should then be rapidly cooled to ensure maximum corrosion resistance. Hot Workingįabrication methods like forging, that involve hot working should occur after uniform heating to 1149-1260☌.

#304l stainless steel full

At the completion of fabrication a full annealing operation should be employed to reduce internal stresses and optimise corrosion resistance. Fabrication methods involving cold working may require an intermediate annealing stage to alleviate work hardening and avoid tearing or cracking. Cold Workingģ04 stainless steel readily work hardens. These precautions are necessary to avoid cross contamination of stainless steel by easily corroded metals that may discolour the surface of the fabricated product. Tooling and work surfaces must be thoroughly cleaned before use. Fabricationįabrication of all stainless steels should be done only with tools dedicated to stainless steel materials. this material will retain aqueous corrosion resistance. Where high strength is required at temperatures above 500☌ and up to 800☌ grade 304H is recommended. In this instance 304L is recommended due to its resistance to carbide precipitation. However, continuous use at 425-860☌ is not recommended. Heat Resistanceģ04 has good heat resistance to oxidation in intermittent service up to 870☌ and in continuous service up to 925☌. Stress corrosion cracking can occur above 60☌.

Pitting and crevice corrosion can occur in environments containing chlorides. Corrosion Resistanceģ04 has excellent corrosion resistance in many environments and when in contact with different corrosive media.

Brewery, food, dairy and pharmaceutical production equipment.It is reasonable to expect specifications in these standards to be similar but not necessarily identical to those given in this data sheet. Property given in this data sheet is typical for flat rolled products covered by ASTM A240/A240M. 304H, a high carbon content variant, is also available for use at high temperatures. Some products such as plate and pipe may be available as “dual certified” material that meets the criteria for both 304 and 304L. It is used in heavy gauge components for improved weldability. Type 304L is the low carbon version of 304. This property has resulted in 304 being the dominant grade used in applications like sinks and saucepans. Type 304 stainless steel is an austenitic grade that can be severely deep drawn. It is still sometimes referred to by its old name 18/8 which is derived from the nominal composition of type 304 being 18% chromium and 8% nickel. Type 304 is the most versatile and widely used stainless steel. Stainless steel 304 and 304L are also known as stainless steel 1.4301 and 1.307 respectively.